Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Beverly Hills, CA
Chimney repair in Beverly Hills usually means working on a fireplace that’s been part of the house since the 1920s or 1930s. The job isn’t just clearing soot. It’s evaluating original clay-tile flues, Spanish Colonial Revival masonry, and decades-old gas conversions that may never have been done properly. Brownstone Chimney Sweep has served Beverly Hills since 2012, and we approach every repair as a preservation project first: keep the original character, fix what’s failing, and never recommend liner or crown work unless the camera shows a real problem. Call (866) 253-8489 for a straight assessment.
Why Beverly Hills Homes Are Different
The housing stock here isn’t like the rest of Los Angeles. Homes in the Flats are predominantly 1920s and 30s Spanish Colonial Revival and Tudor estates, many with two or three original masonry fireplaces, hand-finished plaster surrounds, and clay-tile roofs that make chimney access more delicate than a standard composition roof. Above Sunset, the hillside contemporary and mid-century Modern houses present a different set of conditions: steeper roof pitches, limited staging areas, and fireplaces that were often decorative from day one.
The climate shapes how these chimneys fail. Beverly Hills sits in a warm, dry Mediterranean zone with a long fire season. Chimneys go unused for months at a stretch, and creosote from the previous winter hardens and accumulates quietly. When the first cool evenings arrive in November, or when a Santa Ana wind event prompts heavy burning, that buildup becomes an active fire risk. We also see more wildfire-driven chimney anxiety here than almost anywhere else in the county. Dry brush, mature landscaping, and the simple fact that one ember from an uncapped flue can travel a long way in a wind event keeps chimney and spark arrestor condition at the top of the inspection list.
Styles & brands we work with
Our Main Beverly Hills Services
Most Beverly Hills homeowners call us for one of two things: a chimney sweep on a fireplace that hasn’t been touched in years, or a dryer vent cleaning after a remodel exposed how much lint has accumulated behind the wall. Both fall under the same fire-safety responsibility.
Chimney Sweep in Beverly Hills
A sweep here often doubles as a discovery inspection. In hillside streets above Sunset, we routinely find fireplaces that were converted to gas log sets decades ago but never had the flue properly cleaned or relined. That means the job is as much about identifying what the previous owner ignored as it is about removing creosote and soot. In older Spanish Colonial homes, we take extra care around hand-finished plaster and stone surrounds, using low-impact tools and full drop-cloth coverage. For full details on what a sweep includes in this area, see our Chimney Sweep in Beverly Hills page.
Dryer Vent Cleaning in Beverly Hills
Lint buildup is a house fire hazard most chimney-only companies never address, which is why we made dryer vent cleaning a core service line. Beverly Hills homes built in the 20s and 30s often have long, winding dryer vent runs that were retrofitted decades after original construction, and every turn is a place lint can collect. We clean the full run from the dryer to the exterior termination using professional equipment, then verify airflow and cap condition. Get the specifics on our Dryer Vent Cleaning in Beverly Hills page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Beverly Hills
Chimney repair here starts with a simple question we ask on nearly every hillside visit: when was the last time anyone actually looked inside this flue? Beverly Hills homes from the 1920s through the 1960s were frequently built with clay-tile liners that have since cracked, spalled, or separated at the joints. Add decades of gas log conversions, occasional wood burning, and long idle stretches that let moisture settle into masonry, and the result is fireplaces that look fine from the living room but have real structural problems above the roofline or behind the damper. Brownstone Chimney Sweep performs repairs using the same professional-grade materials that specialty chimney technicians specify, including HeatShield ceramic resurfacer and DuraFlex liner systems, so a fix here is built to code and built to last. You can read more about the full scope of what we handle on our Chimney Repair page.
Chimney Cap Installation
Signs you need it
You see water staining on the firebox floor, hear birds or animals in the flue, or smell downdrafts when the fireplace isn’t in use.
What it costs in Beverly Hills
Chimney cap installation in Beverly Hills typically runs $225 – $430, depending on flue size and roof access.
How we do it
We measure the flue opening, select a correctly sized cap from the professional lines we stock (including Gelco and Olympia Chimney products), and secure it to the crown with the proper mechanical fasteners, not adhesive alone.
Chimney Liner Installation
Signs you need it
An inspection shows cracked or missing clay-tile sections, or you smell smoke or gas exhaust in rooms adjacent to the chimney.
What it costs in Beverly Hills
Liner installation here generally falls between $2,600 and $5,000, with the final number driven by flue height, liner diameter, and whether the existing tile has to be broken out first.
How we do it
We run a camera inspection to document the current flue condition, size the new liner to the appliance using the manufacturer’s specification, then install a DuraFlex liner system with proper insulation, termination, and crown sealing.
Chimney Flashing Repair
Signs you need it
Water is entering around the roofline where the chimney passes through, showing up as ceiling stains, peeling paint, or damp attic insulation.
What it costs in Beverly Hills
Flashing repair in Beverly Hills typically runs $375 – $700, depending on how many sides are compromised and the roof material.
How we do it
We remove the old flashing, inspect the underlying masonry and roof deck, then install new flashing using professional methods that match the existing roof type, including tile roofs common throughout the Flats.
What Chimney Repair Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Chimney cap installation | $225 – $430 |
| Chimney flashing repair | $375 – $700 |
| Chimney liner installation | $2,600 – $5,000 |
Can you repair a chimney without replacing the whole liner?
Often, yes. If the flue tiles are cracked but the structure is still sound, we resurface the interior with HeatShield ceramic rather than tearing out and replacing the liner. In Beverly Hills we’ve used this approach on many 1930s-era fireplaces, keeping the original chimney intact while restoring its fire safety. The camera inspection tells us if resurfacing qualifies.
Do I need a Level 2 inspection before repair work?
Yes, and we do one. Every repair estimate starts with a camera scan of the full flue, so we know the condition of the tiles, the damper, and the smoke chamber before recommending work. You’ll see the footage yourself before approving anything. Call (866) 253-8489 if you want to know what needs fixing and what doesn’t.
Brands We Service in Beverly Hills
We work with the product lines professional chimney technicians actually specify: Gelco, Olympia Chimney, and Copperfield. We keep common parts and caps stocked for immediate installation, which means less waiting when a simple fix turns into a same-visit repair. See our brands for the full list and why we choose them.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Standard chimney sweep | $189 – $279 |
| Chimney sweep with full camera inspection | $229 – $349 |
| Dryer vent cleaning | $99 – $179 |
| Chimney cap installation | $225 – $430 |
| Chimney flashing repair | $375 – $700 |
| Chimney crown repair | $350 – $650 |
| Chimney liner installation | $2,600 – $5,000 |
| HeatShield resurfacing | $1,800 – $3,300 |
What pushes prices up in Beverly Hills is mostly roof access. Clay-tile roofs and steep hillside pitches require extra staging and care, and multi-story homes above Sunset add time. The chimney’s condition matters too: a liner that has to be broken out costs more than one that can be resurfaced. We give a flat-price quote before booking, so you know the number before we start work, and we never add costs after the fact without camera evidence you’ve seen yourself.
Neighborhoods We Serve in Beverly Hills
We work throughout the city, from the tree-lined streets of the Flats to the winding hillside roads above Sunset. Response time is typically one to two days for most neighborhoods, and we schedule around HOA access restrictions where they apply.
- The Flats
- Trousdale Estates
- Beverly Hills Post Office
- Beverly Hills Gateway
- Beverly Park
Service Area – Cities Near Beverly Hills
We also serve homeowners in the cities that ring Beverly Hills. If you’re in Century City, CA, West Hollywood, CA, Culver City, CA, or Hollywood, CA, the same team and the same pricing apply. Call (866) 253-8489 and we’ll let you know how soon we can get there.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Beverly Hills
We typically schedule within one to two days for most Beverly Hills neighborhoods. For non-urgent repair work, especially items like liner installation that require planning and parts, we’ll set a specific date rather than give a vague window. Call (866) 253-8489 and we’ll get it on the calendar.
Some do, particularly in gated communities and hillside associations. We’re familiar with the access requirements and can work with your HOA or property manager on scheduling and any exterior work notification. The homeowner handles any formal approval, but we’ll provide whatever documentation the association needs.
Not always. Wind events push a lot of debris into uncapped flues and can loosen existing creosote in ways that make a visual inspection necessary. We recommend an inspection anytime heavy winds are followed by immediate burning, just to confirm the flue is clear and the cap is still seated. Call (866) 253-8489 and we’ll check it properly.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Michael Meyer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Robert Thompson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Elena Martinez