Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Artesia, CA
Chimney repair in Artesia means working on 1950s and 1960s tract homes where the original clay-tile liners have spent six or seven decades absorbing South Bay moisture. Most of what we do here starts with a sweep that turns into a liner inspection, because the original single-wythe brick chimneys were built before modern clearance standards and were rarely capped. Brownstone Chimney Sweep has served Artesia since 2012, and we carry the repair materials that hold up in this climate. Call (866) 253-8489 for an honest assessment.
Why Artesia Homes Are Different
Artesia’s housing stock is mostly post-war stucco tract homes on tight lots, and those original fireplaces were built in an era when a chimney was treated as a masonry box, not a venting system. The clay-tile flues installed in the 1950s and 1960s have decades of creosote layered onto surfaces that are also spalling from repeated moisture cycles. Artesia sits in the coastal plain south of the 91, where the winter rains aren’t harsh but they’re steady, and uncapped flues take on water year after year. What we find on streets off Pioneer Boulevard after a wet winter is predictable: cracked flue tiles, rusted dampers, and mortar joints that have softened to the point where the crown is failing. The mild but damp winters are exactly what makes the damage worse, because homeowners don’t see a dramatic freeze event and assume the chimney is fine. It isn’t – moisture works slowly, and by the time a tile cracks, the repair conversation has changed. A standard sweep in Artesia is almost always a liner inspection, because the original materials were never built for decades of this.
Styles & brands we work with
Our Main Artesia Services
The two calls we get most from Artesia homeowners are chimney sweeping and dryer vent cleaning – both are fire-safety services, and both tie back to the same issue: systems that haven’t been opened up and inspected in years.
Chimney Sweep in Artesia
A proper sweep in Artesia involves more than brushing the flue. We’re looking at the crown, the cap, the damper, and the exposed liner in the attic, because the original 1950s and 1960s chimneys here rarely have the clearances modern code requires. The coastal dampness means older clay tiles crack and spall, which changes how creosote behaves and how much of it can be safely removed. Read the full breakdown on our Chimney Sweep in Artesia page, which covers exactly what we inspect on a sweep in this housing stock.
Dryer Vent Cleaning in Artesia
Dryer vents in Artesia’s older tract homes tend to be short runs through the wall or up through the roof, and the lint that accumulates in them sits through the same damp coastal air that affects chimneys. A five-foot vent packed with damp lint is a different fire risk than a clogged chimney, and we treat it with the same inspection discipline. Our Dryer Vent Cleaning in Artesia page explains how we handle the runs common in these 1950s and 1960s floor plans.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Artesia
Chimney repair in Artesia usually comes down to two things: the top of the chimney and the inside of the flue. The original clay-tile liners in these post-war tract homes were installed before modern clearance standards existed, and after decades of damp South Bay winters, they crack, spall, or simply fall out of place. When water gets in through an uncapped flue, it doesn’t just sit there – it works into the mortar, rusts the damper, and accelerates the decay of whatever liner is left. Brownstone Chimney Sweep repairs what we find, using materials like Gelco crown sealer and DuraFlex liners, not patch compounds that fail in two years. For the full scope of chimney repair work we handle, see our Chimney Repair page.
Chimney Cap Installation
Signs you need it
Rainwater pooling at the bottom of the firebox after a storm, or visible rust staining on the damper, means the flue has been open to Artesia’s wet season.
What it costs in Artesia
A new stainless or copper cap installed in Artesia typically runs $180 to $340 depending on flue size and access.
How we do it
We measure the exact flue dimensions, set a cap that matches, and secure it so the next ten rainy seasons pass without water getting in.
Chimney Liner Installation
Signs you need it
Crumbling clay-tile pieces landing in the firebox, or a sweep that exposes gaps and cracks in the original 1950s liner, means the flue can’t safely contain heat and gases anymore.
What it costs in Artesia
Liner installation in Artesia typically lands between $2,200 and $5,300 depending on flue length, material, and whether the old liner has to be broken out first.
How we do it
We size a DuraFlex stainless liner to the actual appliance and chimney dimensions, drop it through the flue, and tie it into the existing masonry so it vents properly.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the fireplace, or damp drywall around the chimney chase after a rain, point to flashing that has pulled away from the roofline.
What it costs in Artesia
Flashing repair in Artesia typically runs $250 to $650, less if it’s a simple reseal and more if the old flashing has to be cut out and replaced.
How we do it
We cut out the failed flashing, install new metal that laps the roof and the brick correctly, and seal the joints so water from the next coastal storm stays outside.
Chimney Crown Repair
Signs you need it
A cracked or spalled concrete crown, or standing water on the crown after a rain, tells us the chimney’s top is no longer shedding water the way it should.
What it costs in Artesia
Crown repair in Artesia ranges from $300 to $800 depending on whether we’re sealing cracks with a Gelco product or rebuilding the crown entirely.
How we do it
We clean the crown, repair the damage with a professional-grade sealer or fresh concrete, and shape the surface so water runs off instead of pooling.
What Chimney Repair Costs in Artesia
| Item | Typical range in Artesia |
|---|---|
| Chimney cap installation | $180 – $340 |
| Flashing repair | $250 – $650 |
| Crown repair | $300 – $800 |
Liner installation runs higher because it’s a full system replacement, and in Artesia the original clay-tile flues often need to be broken out before a new liner goes in. The figures above are the ranges we quote on the phone, and the price we agree to is the price you pay.
What causes cracked flue tiles in Artesia chimneys?
Years of damp coastal air and rain entering through uncapped flues, then sitting against 60-year-old clay tiles, is what causes the spalling and cracking we see constantly in Artesia. The original liners were never built for this much moisture.
Can a cracked liner be repaired without replacing the whole thing?
In many Artesia homes, yes. HeatShield ceramic resurfacing can rebuild the flue surface in place when the structure is still sound, which avoids a full liner replacement. We’ll only recommend it after camera inspection confirms the condition.
Brands We Service in Artesia
We work with the product lines professional chimney technicians actually specify on the job: Gelco for crown sealing, Olympia Chimney for caps and dampers, Famco for vent terminations, and Copperfield for access and chase components. See our brands for the full range. These aren’t hardware-store substitutes, and we carry the common sizes on the truck so a repair in Artesia doesn’t stretch out waiting on a shipment.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Artesia, CA
| Service | Typical range in Artesia |
|---|---|
| Chimney sweep and inspection | $180 – $240 |
| Chimney cap installation | $180 – $340 |
| Chimney flashing repair | $250 – $650 |
| Chimney crown repair | $300 – $800 |
| Chimney liner installation | $2,200 – $5,300 |
| Dryer vent cleaning | $120 – $180 |
In Artesia, two things push prices toward the upper end of those ranges: access problems on tight lots with low rooflines, and the condition of original 1950s and 1960s masonry that has to be worked around carefully. You’ll get a firm price before any work starts, and we don’t add surprise charges once the job is underway.
Neighborhoods We Serve in Artesia
We work across Artesia’s residential streets, from the pockets of ranch homes off Pioneer Boulevard to the cul-de-sacs near the 91, and the ZIP codes 90701 and 90702. Most of the chimneys we see are in original-condition tract homes, which makes our response time in Artesia typically within a couple of days for a sweep, and often same-week for repair estimates.
- Pioneer Boulevard corridor
- Neighborhoods west of Norwalk Boulevard
- The tract homes east of the 91
- Artesia’s southern residential streets near the Cerritos border
- The ranch homes off South Street
Service Area – Cities Near Artesia
Brownstone Chimney Sweep works throughout the bordering communities around Artesia. If you’re in Cerritos, CA, La Palma, CA, Hawaiian Gardens, CA, or Norwalk, CA, we cover the same post-war housing stock and the same coastal climate problems that affect Artesia chimneys.
Serving Artesia, CA — Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Artesia
For most Artesia streets, we can schedule a sweep within two to three days. Repair estimates often happen within the same week. During the fall, before the burning season starts, call a couple weeks ahead if you can.
Most liner installations and structural chimney repairs in Artesia require a permit through the city, and we handle that paperwork as part of the job. A standard sweep or cap installation generally doesn’t need one.
Yes, and many Artesia homeowners do exactly that, since both are fire-safety services and both are usually overdue. We’ll confirm both jobs when we book, and you pay one visit fee for the combined trip. Call (866) 253-8489 to schedule.
If your Artesia chimney has never had a camera inspection, or you’ve been told it needs work you can’t verify, call us. We’ll show you the condition with our own equipment and tell you straight what actually needs doing, what can wait, and what it costs. Reach Brownstone Chimney Sweep at (866) 253-8489 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Artesia Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Alma Torres"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Veronica Herrera"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Paul Ackerman