Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Montebello, CA
Chimney repair in Montebello usually means one of two things: a cracked crown letting water into a 1950s masonry chimney, or a clay tile flue that has started spalling after decades of hot, dry summers and damp winters. We handle both, and we’ve been doing it here since 2012. Most Montebello homes we visit were built between the 1940s and 1970s, and the chimneys on those houses are reaching the age where the original clay liners and mortar joints need real attention, not just a sweep. Call (866) 253-8489 when you want to know what’s actually going on inside your flue.
Why Montebello Homes Are Different
Montebello sits in the South Coast Air Basin, and that matters more than most homeowners realize. Winter nights get cold enough to run a fireplace, but the air quality here is among the worst in the nation. That combination means two things for your chimney. First, the creosote that builds up during a burn season has all summer to harden into a glaze that is significantly more flammable than fresh buildup. Second, many Montebello residents still burn wood for heat, so pre-burn-season inspections are a regular part of the calendar here, and we book them heavily from late September through November.
The housing stock tells the rest of the story. The flats and neighborhoods near downtown and the Whittier Narrows area are full of mid-century tract homes with original masonry fireplaces and clay tile flues. Those flues are now fifty, sixty, seventy years old. Hot, dry summers bake the exterior masonry, and mild winter rains work into any hairline crack. The freeze-thaw cycle that damages chimneys in colder climates is replaced here by a bake-soak cycle that is slower but just as persistent. Water intrusion is the number one repair trigger we see in the 90640 ZIP code.
Styles & brands we work with
Our Main Montebello Services
Most Montebello homeowners call us for one of two reasons: a fireplace that has not been swept in years, or a dryer vent that someone finally flagged as a fire risk. Both are part of the same fire-safety picture, and both are services we do in-house with our own technicians.
Chimney Sweep in Montebello
A sweep in Montebello is rarely just a brush through the flue. Older homes near the historic core often have clay tile liners with mortar joints that have been quietly deteriorating for decades. When we sweep those chimneys, the rotary brush sometimes dislodges loose mortar the homeowner never knew was failing. That’s actually valuable information, because it tells us the flue needs closer inspection before the next burn season, not after. We sweep it, we inspect it, and if repairs are needed, we can schedule them without sending you to another contractor. Chimney Sweep in Montebello covers that service in detail, including what a standard level of cleaning includes and when a deeper clean is warranted.
Dryer Vent Cleaning in Montebello
Mid-century Montebello homes often have laundry rooms tucked into hallways or garages, which means the dryer vent run can be long, with multiple bends. Every bend is a place where lint accumulates. We treat dryer vent cleaning with the same inspection discipline we bring to a chimney: we measure airflow before and after, we check the termination cap, and we document what we removed. Fire safety starts at the flue and ends at the dryer vent, and the lint inside a long Montebello vent run is as much a fuel source as creosote. Dryer Vent Cleaning in Montebello goes deeper into what we find in local vent runs and how often they should be cleaned in this climate.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Montebello
Montebello chimney repair work is driven by two forces that work together: water and age. Most of the chimneys we repair belong to homes built between the 1940s and 1970s, and their clay tile liners have been expanding and contracting through five or six decades of South Coast Air Basin weather. When summer heat bakes the exterior brick and winter rain seeps into the crown or flashing, the liner on the inside takes the damage quietly. By the time a homeowner notices something, it is usually a water stain on the ceiling near the fireplace, crumbling mortar in the firebox, or a smell of smoke that lingers long after the fire is out. We repair all of it, and we use the same professional-grade materials our technicians would specify for their own homes. Our Chimney Repair service page covers the full scope of what we do, but the two sub-jobs below account for most of our Montebello calls.
Chimney Crown Repair
Signs you need it
You’ll see cracks or spalling on the concrete surface at the top of your chimney, or you’ll notice water staining on the interior ceiling near the fireplace after a winter rain.
What it costs in Montebello
Crown repair in Montebello typically runs $600 – $1,200, depending on the extent of the cracking and whether we can seal the existing crown or need to pour a new one.
How we do it
We clean the crown surface, fill and seal hairline cracks, and apply a waterproof sealant, or we form and pour a new concrete crown with a proper drip edge when the old one is beyond sealing.
Chimney Flashing Repair
Signs you need it
Water gets into the attic or along the ceiling near the fireplace after rain, and you may see rusted, lifted, or missing metal where the chimney meets the roofline.
What it costs in Montebello
Flashing repair ranges from $350 – $850 in Montebello, depending on how much of the existing flashing can be salvaged versus replaced.
How we do it
We inspect the existing flashing and roof penetration, remove the damaged sections, and install new step flashing and counter-flashing sealed against the chimney masonry so water sheds away from the penetration.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked, spalling, or missing sections of clay tile, or you have an older chimney in Montebello that was built without a modern liner at all.
What it costs in Montebello
Liner installation in Montebello generally runs $2,800 – $5,200, with the final number depending on flue height, liner diameter, and whether the home uses wood, gas, or oil.
How we do it
We size the flue to the appliance it serves, install a DuraFlex stainless steel liner sized correctly for the fireplace or furnace, and insulate it where code and performance require.
What Chimney Repair Costs in Montebello
| Item | Typical range in Montebello |
|---|---|
| Chimney crown repair | $600 – $1,200 |
| Chimney flashing repair | $350 – $850 |
| Chimney liner installation | $2,800 – $5,200 |
Do I really need a new liner, or can the old one be repaired?
It depends on what the camera shows. Where the deterioration is limited to sections of the flue, HeatShield resurfacing can restore a smooth, insulated surface without removing the old tiles. If the tile structure is collapsing or the flue was never lined properly, a full DuraFlex reline is the correct fix.
Can you do a repair the same day as the sweep?
Sometimes, yes. If we find a failing crown or flashing during a sweep and the weather allows, we can often complete smaller repairs on the same visit. Bigger jobs like a full liner installation are scheduled as a follow-up, usually within a week or two, and we will always show you the camera footage before we recommend anything. Call (866) 253-8489 for an exact quote, estimates are free.
Brands We Service in Montebello
We stock and install HeatShield ceramic resurfacer, DuraFlex stainless liners, and Olympia Chimney components, plus Famco caps and dampers for termination work. Because we keep these parts on hand, most Montebello repairs do not wait on a shipped part from out of state. See our brands for the full list of product lines we carry, the same ones professional chimney technicians specify.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Montebello, CA
| Service | Typical range in Montebello |
|---|---|
| Chimney sweep (standard, no major buildup) | $170 – $240 |
| Chimney sweep (heavy creosote or glaze) | $250 – $350 |
| Chimney inspection | $175 – $300 |
| Dryer vent cleaning | $199 – $350 |
| Chimney crown repair | $600 – $1,200 |
| Chimney flashing repair | $350 – $850 |
| Chimney liner installation | $2,800 – $5,200 |
What pushes a Montebello price toward the upper end of a range is usually access, liner condition, or how long the creosote has been hardening in a disused flue. The homes near the Whittier Narrows area and downtown can have tight roof pitches that make chimney access slower. Whatever the job, the price we agree to before we start is the price you pay. No one from Brownstone Chimney Sweep will ever surprise you with an add-on charge after the work is done.
Neighborhoods We Serve in Montebello
We work throughout the 90640 ZIP code, from the older streets near downtown Montebello to the neighborhoods along Whittier Boulevard and the residential pockets near the golf course and the Shops at Montebello. Most appointments in Montebello are scheduled within two to three business days, with shorter waits outside burn season.
- Downtown Montebello
- Whittier Narrows area
- Montebello Hills
- North Montebello
- South Montebello
Service Area – Cities Near Montebello
Brownstone Chimney Sweep also serves the communities around Montebello, including Pico Rivera, CA, South San Gabriel, CA, East Los Angeles, CA, and Monterey Park, CA. If you are in one of those cities and need a chimney sweep, liner inspection, or dryer vent cleaning, we send the same technicians and the same professional-grade materials we use here in Montebello.
Serving Montebello, CA — Our Local Coverage Area
We’re based in the Montebello area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Montebello
We typically schedule Montebello appointments within two to three business days. During the pre-burn-season rush from late September through November, that can stretch to about a week, so call earlier in the summer if you want a fall sweep without the wait.
Most routine sweeps, inspections, crown repairs, and flashing work do not require a city permit. Full liner installations and structural rebuilds can trigger permit requirements depending on scope. We handle the paperwork on any job that requires it, and we will tell you before work starts if a permit applies to your project.
Yes, we serve the entire 90640 area, including the older tract homes in the flats and the newer hillside construction. The terrain and chimney types vary, but we bring the same inspection camera and the same straight-talk approach to every job in Montebello.
When you’re ready to get your Montebello chimney looked at, call Brownstone Chimney Sweep at (866) 253-8489. We’ll schedule a visit, inspect what’s actually going on, and give you a straight answer about what your chimney needs, what it costs, and what can wait.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Montebello Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Paul Ackerman"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Malik Mosley"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Michael Meyer