Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Lomita
Dryer vent cleaning in Lomita runs $140 – $240 for a standard single-story home, and we can usually get to your 90717 address within a few business days. The real question for most Lomita homeowners isn’t the cost, it’s whether the vent has been crushed behind a remodeled closet or is rusting out on the ocean-facing wall where you can’t see it. Our team works the South Bay grid every week, so we know the 1940s-to-1960s ranch and bungalow stock here better than most. Call (866) 253-8489 for a free estimate, and we’ll tell you straight what your vent actually needs.
Why Brownstone Chimney Sweep Is Lomita’s Preferred Dryer Vent Cleaning Company
We’re not a generalist handyman crew that added dryer vents to the menu. Ruben Archuleta built this company around one idea: fire safety starts at the flue and ends at the dryer vent. That’s why Lomita homeowners call us for vent work when their chimney-only company says they don’t do laundry rooms. We do both, and we treat them as one system.
Lomita’s housing stock demands that approach. Most homes along the 90717 grid were built between 1945 and 1965, when builders ran clay flue liners for fireplaces and called it a day. Dryer vents came later, often retrofitted through closets and wall cavities that were never designed for airflow. When we clean a dryer vent in Lomita, we’re also looking at how that vent interacts with the masonry it terminates through. That’s not a detail most vent cleaners even check.
Customers around Lomita Park, the neighborhoods off Narbonne Avenue, and the streets west of Pennsylvania Avenue tell us the same thing: they want one company that can clean the dryer vent and inspect the chimney in the same visit. That’s what we do. If we find a crushed duct or a rusted termination, we repair it with Famco or Olympia Chimney parts, not whatever’s on the shelf at a box store.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Lomita
Dryer Vent Cleaning
A standard Dryer Vent Cleaning on a Lomita ranch or bungalow takes 45 to 90 minutes. We run a rotary brush and high-pressure air through the full duct run from dryer to termination, then vacuum out the lint trap, the interior duct, and the exit point. If your vent terminates on the ocean-facing wall, we pull the cap and check for rust and salt crust, because that’s where Lomita vents fail first.
Level 1 Annual Inspection
For homes with a fireplace and a dryer, we recommend a Level 1 inspection that covers both the flue and the vent path in one visit. This matters in Lomita because the marine layer keeps masonry damp between uses, and damp masonry next to a dryer penetration creates exactly the conditions that hide problems. We inspect the vent run for lint buildup, crushed sections, improper termination, and moisture intrusion at the wall.
Dryer Vent Termination and Duct Re-Routing
Older Lomita homes routinely have terminations that were never properly flashed or capped. When we find a rusted Famco cap or a duct that dead-ends against spalling brick, we replace the termination and rerun the duct in rigid metal. We use backdraft dampers where the onshore breeze pushes moisture back into the assembly. The goal is a vent that stays dry and moves air, even on still mornings when the marine layer sits over the South Bay.
Vent Repair for Remodeled Closets
Lomita’s original compact closets get remodeled constantly, and the vent path is usually the casualty. We see crushed flex duct, kinked runs, and vent paths that suddenly narrow behind a new shelf or wall. If your dryer takes two cycles to finish a load, there’s a decent chance a remodel did something to your vent. We trace the whole run and fix what’s been bent, crushed, or buried.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lomita
We stock and install the brands your chimney technician actually specifies: Famco for vent caps and dampers, Olympia Chimney for termination components, and HeatShield for flue resurfacing when a dryer-vent inspection turns up adjacent flue damage. If you’ve got a vintage Lomita chimney that’s spalling at the crown near your vent termination, we can often address the flue with HeatShield ceramic resurfacer instead of a full tear-out. That’s the difference between a company that patches a vent and one that understands the masonry around it. We keep common Lomita-specific parts on the truck, so most repairs happen same-visit, not as a follow-up.
Common Dryer Vent Cleaning Problems We See in Lomita Homes
- Ocean-facing wall penetrations rusting from the outside. The salty onshore breeze off the Pacific corrodes vent terminations faster than inland cities see in a decade. A vent that looks fine from the laundry room can be a rusted shell on the exterior wall. We pull the cap and check every time.
- Crushed and undersized duct runs behind remodeled closets. Lomita’s original floor plans didn’t include laundry rooms with dedicated vent chases. Retrofitted runs often bend, kink, or get crushed during remodels. Lint traps exactly where the duct narrows, just like smoke spill traps in an undersized flue.
- Shallow or missing vent caps letting moisture and pests in. Many original Lomita homes have terminations with no backdraft protection. Wind-driven marine-layer moisture blows in, and animals follow. We replace shallow caps with proper Famco or Olympia terminations that seal when the dryer isn’t running.
- Masonry spalling and damp staining near the vent exit. The cool, damp overnight air in the South Bay keeps chimney and wall masonry moist. Where a dryer vent penetrates that masonry, spalling and efflorescence develop faster than on the inland side of the Palos Verdes hills. We address the penetration, not just the lint.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Lomita, CA
A standard dryer vent cleaning in Lomita runs $140 – $240 for a single-story home with an accessible vent run. Two-story homes or runs over 15 feet typically fall in the $175 – $275 range. If we find a crushed duct, rusted termination, or a vent that needs re-routing, we quote the repair before doing the work, and you’ll see what we see: we photograph the vent interior as part of every cleaning. That’s the straight-talk part of what we do. Estimates are free. Call (866) 253-8489 and we’ll give you a firm number for your Lomita home.
Here’s what affects cost in Lomita specifically:
- Vent length and accessibility: Runs that cross a garage or crawl space take longer to clean properly.
- Termination condition: Ocean-facing terminations often need cap replacement or masonry touch-up around the penetration.
- Remodel damage: Crushed or kinked sections found during inspection require repair before cleaning can be effective.
- Access from the roof or exterior: Some Lomita homes need roof access for the termination, which adds labor.
We Also Serve Cities Near Lomita
Beyond Lomita, our crews regularly work Torrance, Rolling Hills Estates, West Carson, and Manhattan Beach. If you’re on the Lomita-Torrance border off Western Avenue or up toward the Palos Verdes slope in Rolling Hills Estates, you’re in our regular service area. The vent problems change street by street, but the fix is the same: clean it, inspect it, repair it right.
Serving Lomita, CA — Our Local Coverage Area
We’re based in the Lomita area and know this community well, offering trusted Gelco service in Lomita. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Lomita
Every 12 months, and more often if your vent terminates on the ocean-facing wall. Lomita’s marine layer keeps moisture in the vent cavity, which makes lint stick faster and accelerates rust on metal components. An annual cleaning paired with a termination check catches problems before the vent stops moving air entirely. Call (866) 253-8489 to schedule and we’ll get you on the calendar.
Yes, and it’s the single biggest factor we see. Salt-laden air off the Pacific corrodes terminations, dampers, and even the duct itself where it penetrates exterior masonry. Homes east of Narbonne Avenue get less of this than homes closer to the Palos Verdes-side slope, but the whole 90717 grid sits in the marine-layer belt. We check for salt crust and rust on every Lomita job. If your termination is failing, we quote the replacement with a proper Famco or Olympia cap before you have a lint fire or masonry damage.
Yes. We do a combined vent cleaning and Level 1 chimney inspection in the same appointment whenever the home has both. It’s the most common service we run in Lomita, because so many of these 1950s homes have an original fireplace and a retrofitted dryer vent within a few feet of each other in the same wall cavity. One visit, one report, both systems checked. Call (866) 253-8489 to book.
On still mornings when the marine-layer inversion sits over the South Bay, there’s no air movement to help push moist dryer exhaust out a marginal vent. If your vent is already restricted by lint, a crushed section, or a rusted damper that won’t open fully, the dryer works against backpressure and clothes come out damp. We see this most on older Lomita homes whose original vents were undersized for modern dryers. The fix is a thorough cleaning and, where needed, a re-route to a shorter, straighter rigid-metal run. Call (866) 253-8489 and we’ll diagnose it.
Yes. We replace rusted terminations, repair the masonry penetration where spalling brick meets the vent, and install proper backdraft dampers. Because Lomita’s ocean-facing wall penetrations fail from the outside, we don’t just clean the lint and pat the wall. We address the termination as a component: flash it correctly, seal against moisture, and make sure it moves air before we call the job done. Free estimates at (866) 253-8489.
Call Brownstone Chimney Sweep for Dryer Vent Cleaning in Lomita
If your dryer vent hasn’t been checked in years, or your clothes are taking longer to dry on those damp South Bay mornings, call us. Ruben Archuleta and our Dryer Vent Cleaning team serve Lomita homeowners with the same fire-safety discipline we bring to chimney work. Free estimates, straight answers, and no recommendations without photo evidence you can see for yourself. Reach us at (866) 253-8489.
Written by Ruben Archuleta, Owner at Brownstone Chimney Sweep, serving Lomita since opening our South Bay operations.