Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Temple City, CA
Chimney repair in Temple City often comes down to one recurring situation: a 1950s or 60s ranch home with its original clay tile flue, a masonry crown cracked by decades of San Gabriel Valley heat, and a gas log set that was installed years ago without the vent ever being looked at properly. We handle that mix every week. Brownstone Chimney Sweep has served Temple City since 2012, and the work here is different from what you’d find in newer tract developments or high-rise condo buildings. Call (866) 253-8489 if you need a sweep, a repair, or an honest assessment of whether your flue is safe to use this winter.
Why Temple City Homes Are Different
Most of Temple City’s housing stock went up in the 1950s and 60s as single-story ranch tracts and post-war stucco homes. The builders put in real masonry fireplaces with clay tile liners and brick chimneys, and many of those are still standing today. What’s changed is how people use them. A large share of Temple City households, including a substantial Chinese immigrant community along streets like Las Tunas and Camino Real, have converted their original wood-burning fireplaces to gas log sets or sealed inserts. That shift changes the maintenance picture entirely.
An original masonry flue that once carried wood smoke now sits mostly idle, while a separate 3-inch gas appliance vent does the actual exhausting. Homeowners often assume the old clay flue still gets sooty and needs a traditional brush cleaning, when the real issue is the gas vent’s condition or the broken chimney pot letting birds and attic insulation into the unused flue. Meanwhile, hot dry summers and occasional Santa Ana winds stress the mortar crowns and flashing on these older chimneys, opening hairline cracks that let rain in during the few wet months. Mild winters mean light fireplace use, so creosote accumulation is usually glaze-thin and more tied to odor and pest problems than heavy soot. The repair call in Temple City is rarely about a clogged flue. It’s about water intrusion, deteriorating masonry, or a gas conversion that was never properly vented.
Styles & brands we work with
Our Main Temple City Services
Temple City homeowners call Brownstone for two things more than anything else: a thorough chimney sweep that accounts for gas-converted fireplaces, and dryer vent cleaning for laundry rooms that often hide years of lint buildup. Both are addressed below.
Chimney Sweep in Temple City
A sweep in Temple City starts with figuring out what you actually have: an active wood-burning fireplace, a gas log set, or a sealed insert with a separate vent. On the ranch homes off Camino Real, we routinely find bird nests, old newspaper, or attic insulation packed into original clay tile flues that were abandoned when the gas conversion went in. The sweep involves removing debris from the flue, checking the gas vent line separately, and giving you a straight answer on whether the old masonry chimney needs any attention at all. For full details on what a Temple City sweep includes, see our Chimney Sweep in Temple City page.
Dryer Vent Cleaning in Temple City
Temple City’s single-story ranch homes often route dryer vents through short runs in the wall or under the floor, but the lint still packs in at the termination point and along any corrugated flex sections. A vent that takes too long to dry clothes or a laundry room that gets unusually warm while the dryer runs is a sign the line needs attention. We pull the lint, clear blockages at the vent cap, and confirm airflow with a proper gauge. The fire-safety connection between a neglected flue and a packed dryer vent is real, which is why this is a core service for us rather than an add-on. See Dryer Vent Cleaning in Temple City for the full picture.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Temple City
Chimney repair in Temple City usually starts with either a leaking chimney or a gas log set that was installed without anyone checking the original flue. The older ranch homes here were built with clay tile liners that deteriorate slowly under years of San Gabriel Valley heat and the occasional Santa Ana-driven temperature swing. When the liner cracks or the crown separates, water gets in, and the homeowner notices a stain on the ceiling or a musty smell near the fireplace. Chimney Repair work in Temple City means assessing that original flue before recommending anything, which is exactly how we approach every job.
Chimney Cap Installation
Signs you need it
You hear birds or scratching from the flue, smell a stale odor near the fireplace even when it’s not in use, or see water staining on the ceiling near the chimney chase.
What it costs in Temple City
Chimney cap installation in Temple City typically runs $145 – $375 depending on the cap material, flue size, and roof access, with standard multi-flue caps on mid-century ranch homes landing in the $245 – $375 range.
How we do it
We measure the flue opening, match the cap to the liner’s actual dimensions, secure it to the crown with proper mechanical fasteners, and seal the mounting points so water cannot track underneath.
Chimney Liner Installation
Signs you need it
Your clay tile flue has visible cracks during a camera inspection, you smell exhaust or smoke backing into the house even with the damper open, or the existing liner is sized wrong for the gas insert that was retrofitted years ago.
What it costs in Temple City
A new chimney liner in Temple City typically falls between $1,170 and $2,488 for stainless steel systems on single-story ranch homes, with the final number depending on flue length, liner diameter, and roof pitch on homes near Camino Real and Las Tunas.
How we do it
We run a camera through the existing flue to document the condition, recommend a DuraFlex stainless liner sized for your specific appliance, insulate where the code requires it, and connect the appliance properly at the breach.
What Chimney Repair Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Chimney cap installation | $145 – $375 |
| Chimney liner installation | $1,170 – $2,488 |
| Chimney crown repair | $260 – $510 |
Labor on Temple City’s older ranch homes tends to run slightly higher when roof access is steep or when the chimney sits close to a property line, which is common on the narrower lots in the original tract. We give you a fixed price before any work starts, not an estimate that shifts after we get on the roof.
Do I really need a new liner, or can the old one be fixed?
If camera inspection shows only hairline surface cracks in otherwise sound clay tile, a HeatShield resurfacing can often repair the flue without a full liner replacement. Deep cracks, spalling, or missing tile sections mean a new stainless liner is the safe fix. We show you the camera footage either way. Call (866) 253-8489 to schedule an inspection.
How long does a chimney liner installation take in Temple City?
Most single-story Temple City ranch homes with straightforward roof access are completed in one day. Two-story additions or liners that require a custom-ordered diameter can stretch to two days. We confirm the timeline before scheduling, and we coordinate with your gas appliance service if needed. Call (866) 253-8489 for a specific date.
Brands We Service in Temple City
We stock and install the brands professional chimney technicians actually specify: DuraFlex stainless liners, HeatShield ceramic resurfacing, and Famco caps and terminations. No hardware-store substitutes. Parts are kept in our local inventory, so most Temple City repairs don’t wait on a special order. See our brands for the full parts list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Chimney cap installation | $145 – $375 |
| Chimney cap replacement | $180 – $390 |
| Chimney liner installation | $1,170 – $2,488 |
| Chimney flashing repair | $260 – $510 |
| Chimney crown repair | $260 – $510 |
| Chimney sweep | $190 – $260 |
| Dryer vent cleaning | $135 – $190 |
Prices in Temple City push upward when the chimney sits on a steep roof pitch or when the original construction left restricted access between neighboring ranch homes, which adds setup time. Every job is quoted as a flat price after we see the chimney, and that number is the number you pay.
Neighborhoods We Serve in Temple City
We work throughout Temple City’s 91780 ZIP code, from the original ranch tracts south of Las Tunas to the newer and rebuilt homes along the northern edge near the San Gabriel border. Most of our Temple City calls come from the following areas:
- Original ranch tracts along Camino Real
- Las Tunas corridor neighborhoods
- Homes near Temple City Park
- The post-war stucco streets south of Live Oak Avenue
- The northern residential blocks near Emerson Elementary
Typical response time for a Temple City scheduling call is one to two business days, with repairs usually booked within the week.
Service Area – Cities Near Temple City
Brownstone Chimney Sweep serves Temple City and the surrounding San Gabriel Valley communities. If you live just outside the city limits, we likely cover your area as well. See our pages for North El Monte, CA, Rosemead, CA, San Gabriel, CA, and Arcadia, CA for local details in those cities.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Temple City
We typically schedule Temple City inspections within one to two business days, and we book most repair work inside a week. Emergency situations involving water actively entering the home can sometimes be slotted the same day. Call (866) 253-8489 with your availability and we’ll find a window that works.
Most chimney repairs, including cap installation, crown sealing, and liner replacement through an existing flue, do not require a city permit in Temple City. Structural rebuilds or changes to the chimney’s exterior dimensions may. We handle the paperwork side for any job that needs it and will tell you upfront if your project falls into that category.
Yes. The majority of Temple City fireplaces we see are gas log sets or inserts retrofitted into original wood-burning masonry chimneys, and we inspect gas vents separately from the old flue. Wood-burning setups are swept and inspected the traditional way. If you have both, we address both on the same visit.
Call Brownstone Chimney Sweep at (866) 253-8489 for a free estimate on any chimney repair, sweep, or dryer vent cleaning in Temple City. We’ll give you a straight answer about what your chimney actually needs, and nothing more.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Paul Ackerman"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Malik Mosley"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Michael Meyer